unke liye jinhe lagta he ki sarkar kuch karti nahi...

बन्दे में दम है...! जब गुजरात के CM थे तो भारत के PM से
भी अधिक प्रभाव रखते थे.. अब PM है तो SAARC के
सभी नेताओं से भी अधिक प्रभाव रखते है ।
# सेंसेक्स 20000 से 29000 पर, Nifty 5000 से 8500 पर, #
GDP लगभग 4 से 5.7, टमाटर 80 से 20 पर, # पेट्रोल 73 से 60
पर, सोना 28000 से 25900, # स्टैण्डर्ड_एंड_पूवर्स
की रेटिंग नेगेटिव से पॉजिटिव हुई, चीन अगले
पांच साल में 5 लाख करोड़ निवेश करेगा, # जापान 38 खरब $ निवेश
करेगा अगले 3 साल में, अमेरिका और #
ऑस्ट्रेलिया भी निवेश करेगा भारत में !! लेकिन कुछ लोगों के
लिए ये # अच्छे दिन नहीं हैं !! फिर भी कुछ
लोगो को लगता है की अच्छे दिन का मतलब #
मोदी जी आयेंगे उनका # काम करने या #
झाड़ू लगायेंगे उनके यहाँ [: वाह
मोदी जी वाह!!!!
मोदी जी के 4 नये और बडे फरमान........ . .
1- कोई भी विदेशी दौरे पर
पत्रकारों की भीड़ को साथ लेकर
नहीं जाएगा...... लग गई
वाट ,पत्रकारों की मौज खत्म 2-
सरकारी कर्मचारी,बाबू, उच्च
अधिकारी, अफसर,IAS, IPS,
मंत्री,संतरी इन सबको अब
अपनी पत्नी और अपने
बच्चों की सम्पति का भी ब्यौरा टैक्स
विभागको देना होगा.. और उनकी जाच टैक्स विभाग
करेगा..अब तो लग गई वाट. 3- सरकारी बड़े
अधिकारियों को विदेश का दौरा करने से पहले PMO को 10 दिन पहले
आवेदन करना पड़ेगा और विदेश दौरे का पूरा ब्यौरा देना पड़ेगा.....क्यूँ
जा रहे हो, क्या करने जा रहे हो..अब तो लग गई वाट. 4- कोई
भी सरकारी मंत्रालय के अफसर 5
सितारा होटल में कॉन्फ्रेस आयोजित
नहीं करेगा...उनको सरकारी भवनों में
ही किया जा सकेगा .. लो लग गई वाट।5
सितारा का खाना भी बन्द कर दिया नरेन्द्र भाई इधर भूटान
गये तो चीन घबराया, ब्रिक्स मे ब्रिक्स बैक
की बात की तो अमेरिका घबराया, जापान के साथ
युद्धाभ्यास किया तो चीन तिलमिलाया उधर अमेरिका से
C-17 global master plane खरीद कर सेना मे
शामिल करने से पाकिस्तान घबराया,वाह वाह... → उधर
चीन जापान को कमजोर करना चहता है. → उधर
अमेरिका चीन को कमजोर करना चाहता है और सब के सब
भारत से निकटता चाहते हैं फ़ुटबाल बना दिया पुरे विश्व को......
मोदी ने.... वाह क्या कूटनीति और क्या विदेश
नीति है....!!! भाई बात को समझो खाली टमाटर
सस्ते होने से अच्छे दिन नही आएंगे आप
की औकात विश्व को पता चलेगी आप का रोब
दुनिया पर चलेगा वो दिन कितना अच्छा होगा जब दुनिया भारत को बडा भाई
मानेगी और आंख उठा कर नही सर झुका कर
बात करेगी क्या खोया हुआ सम्मान पाना अच्छे दिन
नही हे मैं टमाटर तो क्या अपने आत्म सम्मान के लिए
देश के सम्मान के लिए भूखा जान भी दे सकता हूँ
ना फोरवार्ड करने को कह रहा हूँ ना शेअर करने को बस गहराई से
मनन करने का निवेदन कर रहा हूँ । बात दिल को छू जाए और खुद के
भारतीय होने पर गर्व महसूस होने लगे तो ..............
अब महसूस हो रहा है 56" का सीना किसे कहते हैं
मोदी जी को बहुत बहुत धन्यवाद

Install Windows 7/Vista From USB Drive

Requirements:
*USB Flash Drive (Minimum 4GB)
*Windows 7 or Vista installation files.
Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Enjoy!!!!!!

How to Create DNS Server in Windows server 2012

• Hi guys here i telling you how to Create the DNS Server in Windows server 2012
• It is so different type of Installation in Windows server 2012.
• Please Watch this video.

Window 2012 Server Installation 

1. Insert the DVD of Window server 2012 in the DVD Rom.
2. Make first bootable device of DVD writer.
3. Then Restart the System 
   

• After some time it will ask for time and currency format 

• Then click Install Now

• Please Wait Some time now setup is starting

• Then select the Server Type here:-

• Please Accept the License Agreement then click next

• Click on Custom install windows only 

• Then Select the Unallocated Space then click on new for create partition of hard disk

• Then Select the Size Then Click on OK

• Then select the partition and then click on format

• Then click on OK and then Click Next

• This windows is Appearing on Screen.

• Then After the completion this click on Restart Now 

• Please Wait for some time

• please wait for Getting Ready  

• Type the Administrator Password and Reenter Password then Click on Finish  

• After completion this Server Manager windows appear on Screen

And now All finish the Installation of Windows Server 2012 .

Printer Attachment Issue in Windows 7,windows 8 and 8.1

Unable to set DEFAULT PRINTER? - Let's troubleshoot

Unable to Set Default Printer pop-up error window:

This error is related to the old printer you have set as default before. Printers name that was recorded in your registry are priority on the system which you cannot modify if you're trying to set a new default printer. So you have to manually modify the registry. Note that the registry section is very sensitive,  serious  problems might occur if you modify the registry incorrectly.  Therefore, make sure that you follow these steps carefully.  For insurance included, move down the registry before you alter it. And that point, you can restore the registry if an issue happens. For Additional data about how to go down and restore the registry, click the accompanying article number to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: (http://support.microsoft.com/kb/322756/)

Now, here's how to troubleshoot:

1. Click the Start button and type "regedit", then right click and "run as administrator"

2. Now go to this location:

HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Window

3. Located in the right column, you can change the device key v alue data to your printer name.Right click on the Device key then modify the data value (e.g. "HP Laserjet P1006,winspool,Ne03:")

Note: You MIGHT encounter this "Error Editing Value" which you are unable to modify the data,

All you have to do is to set "permissions" to the key, and this is how its done:

Right Click on the "Windows" key and choose "Permissions", check "Allow" -> Apply, then OK.

How to create a Welcome Message in Windows 2008 Domain

Process to set Welcome Logon message to the Domain User Workstation while they log-in:-

In Domain Server we have to follow these procedures to set this policy:-

1)      Login to the Domain server.

2)      Click on Start  .

3)      Select Administrative Tools.

4)      Select Group Policy Management.

5)      Then Group Policy Management Console will be open.

6)      Select “Domain name” under Domains Category menu.

7)      Select Default Domain Policy (from right side menu box).

8)      Right click on “Default Domain Policy” and click on “edit”.

9)      Then other windows of “Group Policy Management Editor” will be open.

10)  Expand “Policies” tab and select “Windows Settings” tab.

11)  Expand “Windows Settings” tab and select “Security Settings”.

12)  Double click on “Local Policies” option from right side menu list.

13)  Then another window will be open.

14)  Double click on “Security option”.

15)  Then another window will be open.

16)  Search for “Interactive logon: Message text for Users attempting to log-on”.

17)  Right click on “Interactive logon: Message text for Users attempting to log-on” and click on properties.

18)  Then tick the box “Define the policy setting in the template” and then type your message in the given below box and apply & Ok.

19)  Search for “Interactive logon: Message title for Users attempting to log-on”.

20)  Right click on “Interactive logon: Message title for Users attempting to log-on” and click on properties.

21)  Click on “Define this policy setting” box and give Title of your message which you have assigned previously then apply & Ok.

22)  After that whenever the Domain user will be restart his/her workstation then after clicking Ctrl+Alt+Del button, then that message will be displayed on screen.

*************************Enjoy the trick ****************

Install Windows 7/Vista From USB Drive

Requirements:
*USB Flash Drive (Minimum 4GB)
*Windows 7 or Vista installation files.
Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Enjoy!!!!!!

Install Exchange Server 2010 in Windows Server 2008 R2

Posted by Bipin on October 15, 2012

Exchange server is one of the popular messaging platform in enterprise. Today I will show you steps to install Exchange server 2010 in Windows Server 2008 R2. There are some prerequisites that must be fulfilled to install the Exchange server successfully. The prerequisites are different for different Windows Server versions and service packs. I will be showing in the test environment in Server 2008 R2. The diagram below shows our network scenario. We don’t have any existing Exchange instance. So we will install Exchange server in fresh environment.

Install Exchange Server 2010 in Windows Server 2008 R2

Installation prerequisites

1. The forest functional level of the DC must be at least Server 2003 or later.
2. Active Directory Schema master must be running in Server 2003 or later.
3. Exchange Server must be member of DC but not Edge Transport Server.
4. The Domain Controller must be a Global Catalog server in this (local) domain.
5. Install .Net Framework 3.5 from Server Manager Add New Features wizard in MBG-Mail Server.
6. Download and install 2007 Office System Converter: Microsoft Filter Pack in MBG-Mail.

Now, insert Exchange server installation disc or ISO Image into the drive. Then open command prompt from start menu as Administrator. Move your root directory to drive where Exchange media resides. Mine is in drive D,

C:\Users\Administrators> D: [Enter]. (Moves the prompt to drive D:)

The first step is to extend the existing Active Directory Schema. This requires installation of RSAT-ADDS tool. Open PowerShell and hit the following command to install RSAT-ADDS.

Import-Module ServerManager

Add-WindowsFeature RSAT-ADDS

Now hit the following command in command prompt to prepare active directory for installing Exchange Server. 

D:\> setup /prepareschema [Enter]

The second step is to prepare Active Directory for Exchange installation. Type your organization name in Organization Name switch. Hit the following command in command prompt.

D:\> setup /prepareAD /OrganizationName:MustBeGeek [Enter]

Now to prepare this domain for Exchange server installation, hit the following commands in command prompt.

D:\> setup /PrepareDomain [Enter]

Now open Windows Powershell and import Server Manager Module,

C:\> Import-Module ServerManager

Run the following command. This command will start mode for the Net. Tcp port sharing service to automatic.

C:\> Set-Service NetTcpPortSharing -StartupType Automatic

Now, we will install typical Exchange server that includes, Hub Transport, Client Access and Mailbox. These roles are typical if you are installing only one Exchange server for small environment. Log on to MBG-Mail server with domain administrator account.

Now copy and paste the following command in PowerShell. Simply copy the command and right-click the mouse button to paste on PowerShell Window. The CTRL+C and CTRL+V doesn’t work inside PowerShell. These command will install all the prerequisites in this server. Different set of commands are available for different Windows Server versions and different Exchange requirement.

Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy -Restart

After completing the installation, the server restarts. After starting the server open the Exchange setup from installation media. You will then see following screen.

As step 1 and step 2 is already completed. Now click the language to install. I will click to install only languages from the DVD. Then click step 4 to install Microsoft Exchange. You will soon see the following box,

Read the introduction and click Next button. Then choose to accept the license agreement and click Next button. Choose No for error reporting to Microsoft and click Next button. Choose the installation type as Typical.

Then click Next button. Type the organization name and click Next.

Select No for Exchange client settings,

In configure client access server external domain option. Leave the defaults and click Next button. Choose I do not want to take part and click Next button. The installation will now go through readiness checks. If there are some errors then it will notify you. Go back and correct those errors if any. If every checks succeeds then you will see similar screen,

Click Install button to begin installing Exchange server. After installation completes you may now want to configure Exchange server to send and receive mails.

How to work With Microsoft Management Console 

How to install the additional Domain Controllers

How to install the additional Domain Controllers

Having a single Domain Controller can be quite risky because in case of any kind of hardware or some other technical failure, the entire network can be destroyed. Recently, we wrote a guide on How to create a Domain in Windows Server 2008, in this post we will tell you how to create a backup Domain or an Additional Domain Controller (ADC). Having an ADC means that in case your primary Domain fails, it takes over the functions of the Primary Domain and keeps the network functional. Client operating systems in this scenario do not get disconnected and a complete network failure is hence, avoided. Moreover, one or more ADCs can help in balancing load of the Domain, fault tolerance and to improve the availability and reliability of network services.

To get started, go to the command prompt or Run, type dcpromo and hit Enter. Whether you are making a Domain, Child Domain, ADC or removing any of them, the dcpromo command is used.

This will take you to the first step of the wizard from where you can create an Additional Domain Controller. Make sure that the advance mode installation option is unchecked and click Next. In case you are wondering what the advance mode installation is used for, it is used for making a RODC (Read Only Domain Controller). An RODC is used by organizations to deploy a DC (Domain Controller) in scenarios where physical security issues occur, such as a subsidiary branch office. It can also be used where local storage of domain passwords is unsafe.

In the next step you will see the same page regarding operating system compatibility which appears when making a DC. Simply click Next to proceed.

When choosing a deployment configuration, select Existing Forest, then select Add a Domain Controller to an existing forest and hit Next.

After that, you will be asked for network credentials which in other words means that you need to enter the name of the Domain that you wish to connect this server to as an ADC. After adding the Domain name, click on the Set button.

This will prompt you to enter credentials to connect to the Domain. Note: the credentials must have administrative privileges. In this case I am using an account that is apart of the Domain Controllers group. After verifying the information, the wizard will allow you to proceed further. Click Next to continue.

In the next section you will be asked to select a Domain Controller. The Domain Controller you entered in the previous step will be selected by default, simply move forward to the next step.

When selecting a site name, leave the default site name as it is and proceed.

Make sure that the DNS Server and Global Catalog check boxes are checked and hit Next. Note: do not check RODC.

Just like when creating a Domain, you will get the choice to set a location for the database, SYSVOL and NTDS files. You may change the destination or let them remain in the default location and proceed to the next step.

Moving forward, you will be asked to save a restore mode password (which is separate from the Domain Administrator’s account). As mentioned in the previous post, this password is configured to be used when the Domain Controller is started in Directory Services Restore Mode. Choose a password and click Next.

Finally, you will be presented with a summary of the selected options which you can review before moving forward.

The Active Directory Domain Installation Wizard will configure services and take you to the next step, where you simply need to click Finish to complete the process.

You will be prompted to restart the system after which your configurations will take effect. Finally you can login with a Domain account and manage your Additional Domain Controller.

How To Create Additional Domain Controller (ADC) In Windows Server 2008

Having a single Domain Controller can be quite risky because in case of any kind of hardware or some other technical failure, the entire network can be destroyed. Recently, we wrote a guide on How to create a Domain in Windows Server 2008, in this post we will tell you how to create a backup Domain or an Additional Domain Controller (ADC). Having an ADC means that in case your primary Domain fails, it takes over the functions of the Primary Domain and keeps the network functional. Client operating systems in this scenario do not get disconnected and a complete network failure is hence, avoided. Moreover, one or more ADCs can help in balancing load of the Domain, fault tolerance and to improve the availability and reliability of network services.

To get started, go to the command prompt or Run, type dcpromo and hit Enter. Whether you are making a Domain, Child Domain, ADC or removing any of them, the dcpromo command is used.

This will take you to the first step of the wizard from where you can create an Additional Domain Controller. Make sure that the advance mode installation option is unchecked and click Next. In case you are wondering what the advance mode installation is used for, it is used for making a RODC (Read Only Domain Controller). An RODC is used by organizations to deploy a DC (Domain Controller) in scenarios where physical security issues occur, such as a subsidiary branch office. It can also be used where local storage of domain passwords is unsafe.

In the next step you will see the same page regarding operating system compatibility which appears when making a DC. Simply click Next to proceed.

When choosing a deployment configuration, select Existing Forest, then select Add a Domain Controller to an existing forest and hit Next.

After that, you will be asked for network credentials which in other words means that you need to enter the name of the Domain that you wish to connect this server to as an ADC. After adding the Domain name, click on the Set button.

This will prompt you to enter credentials to connect to the Domain. Note: the credentials must have administrative privileges. In this case I am using an account that is apart of the Domain Controllers group. After verifying the information, the wizard will allow you to proceed further. Click Next to continue.

In the next section you will be asked to select a Domain Controller. The Domain Controller you entered in the previous step will be selected by default, simply move forward to the next step.

When selecting a site name, leave the default site name as it is and proceed.

Make sure that the DNS Server and Global Catalog check boxes are checked and hit Next. Note: do not check RODC.

Just like when creating a Domain, you will get the choice to set a location for the database, SYSVOL and NTDS files. You may change the destination or let them remain in the default location and proceed to the next step.

Moving forward, you will be asked to save a restore mode password (which is separate from the Domain Administrator’s account). As mentioned in the previous post, this password is configured to be used when the Domain Controller is started in Directory Services Restore Mode. Choose a password and click Next.

Finally, you will be presented with a summary of the selected options which you can review before moving forward.

The Active Directory Domain Installation Wizard will configure services and take you to the next step, where you simply need to click Finish to complete the process.

You will be prompted to restart the system after which your configurations will take effect. Finally you can login with a Domain account and manage your Additional Domain Controller.